1. The boring unit is driven by a 3HP motor.
2. One 5-spindles boring head is standard equipment. Other types of boring head are available upon request.
3. The boring unit moves on high precision liner guide ways for smooth trowel and high linear accuracy.
4. Boring head stroke is adjustable.

1. The moulding units consists of two spindles, which run in opposite directions to avoid work piece tearing during moulding operation.
2. One spindle is fixed, while the other spindle can be adjusted in height position.
3. The moulding unit is equipped with a see-thru guard to prevent chips from splashing.

1. The machine employs two speed regulator knobs to adjust the table feed forward and backward speeds. Permitting work piece contacting cutter smoothly.
2.  Variable feed speed makes the machine ideal for cutting hard and soft wood.
3. The moulding units consists of two spindles.
4. One spindle is fixed, while the other one can be adjusted in height position.
5. The moulding unit is equipped with a see thru guard to prevent chips from splashing.

Electronic parts meet European standards

1. The control circuit in the electric cabinet consists of French TE brand electronic components, meeting European standards.
2. The high performance control circuit assure sensitive and stable motion controls at all times.

1. The table is equipped with a miter gauge with angle setting 0 ~ 45 degree right and left, making the machine suitable for bevel molding operations.
2.  The table is equipped with a 45 degree miter fence, allowing for cutting, boring, and moulding operation. Right and left 45 degree angular tenons can be accomplished at one time ( SK-TF-2 only )

Air clamp
The work piece is clamped by air cylinder for convenient and fart clamping and unclamping.